All Products are 1/12 Scale Unless Noted Otherwise

ATTENTION UNITED STATES SHOPPERS: Due to the United States administration's suspension of the duty-free "de minimus" threshold for all countries, including Canada, all shipments entering the U.S. must have duties prepaid before crossing the border effective August 29, 2025. This change is mandated under U.S. Executive Order 14324 and applies to all shipments from Canada. The Executive Order requires that we, in Canada, charge a 35% tariff on all orders being shipped to the U.S. As a result, we have made the difficult decision to immediately suspend sales to the United States. This will remain in place until the situation regarding tariffs and the above noted Executive Order changes. We are truly saddened to face this situation and hope that we can soon resume business with our U.S. customers, whom we value greatly.

3v Coin Battery Holder with Switch

3v Coin Battery Holder with Switch

$5.99
In stock
(0) Write a Review
SKU:
3vbs

Product Description

An easy way to bring power to your 3V LEDs.

This fully assembled unit features

  • a coin cell holder suitable for the common cr2032 battery
  • Wire leads
  • a convenient push-on push-off button switch to turn your item on and off.
  •  CR2032 battery

This coin cell holder switch unit will run from 1 - 10 LEDs safely and brightly.

***With this unit, solid LEDs need to be separate from any flash or flicker LEDs. Give flash or flicker groups their own coin cell.***

In manufacturers' tests, 6 lights lasted over 12 hours on one battery. By 12 hours they were noticeably dimmer. A test of the battery at 12 hours showed the voltage was down from 3.0 to 2.6 volts. The lights continued to stay on at a nice level for several additional hours before another battery was needed.

Holder/Switch Dimensions:


The coin cell holder is .24 inches thick and .9 inches across at the widest point. You can clip the plastic "wings" to save 0.1 inch on the width if space is at a premium!